 |
|
BCI
6900 SERIES |
Digital
Fiber Optic Extender for Video, Audio, RS-232/RS-422, Ethernet/Fast
Ethernet, and/or T1 |
"Video/Audio/Data
+ Ethernet/Fast Ethernet + T1"
|
|
| |
Applications
 |
Remote
Multimedia Studio |
|
Distance
Learning |
|
Audio/Video/Data
Conferencing |
|
Media
Retrieval and Distribution |
|
|
Features
|
Digital
Encoded Fiber Optic Links |
|
For
1 Video, 2 Audio, 1 Serial Data, 1 Ethernet/Fast Ethernet,
and/or 1 T1 Channel |
|
Duplex
Transmission |
|
Multimode
or Singlemode |
|
|
|
If
your application involves Ethernet/Fast Ethernet and/or T1 PBX with
video/audio/data content, the 6900 Series is the right choice. It
is the only product in the world that can move your video, audio,
RS-232/RS-422, Ethernet/Fast Ethernet and/or T1 simultaneously.
The
6900 system provides simultaneous transmission of one (1) NTSC/PAL
video channel, one (1) stereo audio channel, one (1) RS-232/RS-422,
one (1) Ethernet or Fast Ethernet channel, and/or one (1) T1 channel
over a multimode or singlemode fiber pair. Versions with E1 are
also available as options. All channels are bidirectional. The 6900
Series allows you to carry diversified multimedia data traffic for
remote audio/video/voice/data conferencing over a single fiber pair,
thus saving on installation costs and reducing the number of installed
repeaters. Extend the range of your Ethernet/Fast Ethernet, T1,
video, audio, and RS-232/RS-422 equipment without sacrificing reliability,
and simultaneously get full bandwidth on each channel in remote
locations. The 6900 features a digital, fiber optic transmission
technology, capable of providing sharper video and crisp audio,
little or no maintenance, high function reliability, and low operating
cost. No user adjustments are required in the 6900 system, enabling
quick setup and trouble-free operation. They are also easily monitored
by separate LED indicators for power, optical link, and channel
activity. Due to its digital transmission design, the 6900 is capable
of addressing a variety of non-standard configurations. |
|
Data Sheet - Specifications |
| Video |
| Channel
Capacity |
1 |
| Bandwidth |
6
MHz |
| Video
Level |
1.0
Vp-p at 75 Ohms |
| Differential
Gain Range |
<4
% |
| Differential
Phase Range |
<2° |
| SNR
(weighted) |
58
- 65 dB |
| Connector |
BNC |
|
| Audio |
| Channel
Capacity |
2 |
| Operating
Mode |
Unbalanced |
| Input/Output
Impedance |
10K
Ohms/600 Ohms
(Unbalanced) |
| Max.
Input/Output Level |
5
Vp-p @ 10K Ohms
(Unbalanced) |
| Magnitude
Freq. Response |
20Hz
to 20kHz @ -3 dB |
| SNR
(Weighted) |
>70dB |
| Connector |
RCA |
|
| Serial
Data |
| Channel
Capacity |
1 |
| Signal
Format |
RS-232
or RS-422 |
| Operating
Mode |
Full
Duplex with Handshake |
| Data
Rate |
Up
to 128kbps (RS-232)
Up to 1 Mbps (RS-422) |
| Connector |
DB9 |
|
| Ethernet/Fast
Ethernet |
| Standard |
IEEE
802.3 10 Base-T or
100Base-TX |
| Connector |
RJ-45 |
|
| T1 |
| Format |
AMI
or B8ZS (for T1) |
| Data
Rate |
1.544
Mbps (for T1) |
| Connector |
DB15 |
|
| Optical |
| Fiber
Type |
Multimode
and Singlemode |
| Number
of Fiber |
2
or 1 |
| Wavelength |
850,
1310 and/or 1550 nm |
| Typical
Output Level* |
-15
dBm (Multimode)
-4 dBm (Singlemode) |
| Typical
RX Sensitivity* |
-28
dBm (Multimode)
-28 dBm (Singlemode) |
| Fiber
Optic Connector |
ST(Multimode)
FC (Singlemode) |
| *Depending
on specific model numbers |
|
| Physical |
Dimensions
(H x W x D) |
1.72"
x 16.7" x 13.6" |
| Power |
95
- 240 VAC @ 1.8A max. |
| Operating
Temperature |
0
to +50ƒC |
| Humidity |
0
to 95% RH, non-condensing |
| Status
Indicators |
Power,
Optical Link,
Channel Activity |
|
|
|
| Application |
 |
|
|
|
