 |
|
BCI
290 SERIES |
Low
Cost Fiber Optic Video/Audio/Data Transmission Systems |
"One
Way Video/Audio/Data"
|
|
| |
Applications
 |
Security
Surveillance and CCTV Systems |
|
Traffic
Control and Management |
|
Video/Audio/Data
Communication |
|
|
|
Features
|
Low
Cost Optical Link for Video/Audio/Data |
|
Accommodate
up to 1 Video, 1 Audio and/or 1 Serial Data Channels |
|
Standalone
and Card-cage Packaging |
|
|
|
The standard 290 system is designed
for transmitting one (1) video (NTSC, PAL, or SECAM) channel over
one multimode or singlemode fiber.
The 290 Series is a high-performance
Low Cost Fiber Optic Video/Audio/Data Transmission System. The 290
can be used for either unidirectional or bi-directional transmission.
An additional one (1) channel audio and/or one (1) channel serial
data (RS-232/RS-422) can be added into the 290 for simultaneous
video/audio/data transmission. The 290 series has two configuration
choices: 291 model for unidirectional video only transmission and
292 model for video transmission with audio and data. The 290 comes
with two packaging options: a rugged, standalone, and compact unit,
or a plug-in card for a card cage system. Panel connectors are provided
for video (BNC), audio/data (terminal block), and fiber connection
(ST-type for singlemode and multimode fiber). They are also easily
monitored by separate LED indicators for power, optical link, and
channel activity. The units are powered by +12VDC. The 290 design
is capable of addressing a variety of non-standard configurations.
|
|
Data Sheet - Specifications |
| Video |
| Channel
Capacity |
1 |
| Bandwidth |
Up
to 10 MHz |
| Video
Level |
1.0Vp-p
@ 75Ohms |
| Differential
Gain |
<5% |
| Differential
Phase |
<3° |
| SNR
(Weighted)* |
>58dB |
| Connector |
BNC |
| *Depending
on specific model numbers |
|
| Audio |
| Channel
Capacity |
1 |
| Input/Output
Impedance |
10k/600
Ohms |
| Max.
Input/Output Level |
2Vp-p
@ 10K Ohms |
| Magnitude
Freq. Response |
20Hz
to 15kHz @ -3dB |
| SNR
(Weighted) |
>60dB |
| Connector |
Terminal
Block |
|
| Serial
Data |
| Channel
Capacity |
1 |
| Signal
Format |
RS-232,
RS-422 |
| Data
Rate |
Up
to 64 kbps (RS-232)
Up to 300 kbps (RS-422) |
| Connector |
Terminal
Block |
|
| Optical |
| Fiber
Type |
Multimode
or Singlemode |
| Number
of Fibers |
2
or 1 |
| Wavelength |
850,
1310 and/or 1550 nm |
| Typical
Output Level* |
-16
dBm (Multimode)
-14 dBm (Singlemode) |
| Typical
RX Sensitivity* |
-20
dBm (Multimode)
-24 dBm (Singlemode) |
| Fiber
Optic Connector |
ST
(for Multimode)
ST (for Singlemode) |
| *Depending
on specific model numbers |
|
| Physical |
| Dimensions:
(H x W x D) |
| 291
Tx version |
0.88"
x 1.30" x 2.25" |
| 291
Rx version |
1.38"
x 4.36" x 3.90" |
| 292
Tx or Rx version |
1.38"
x 4.36" x 3.90" |
| 292
TRx version |
1.38"
x 4.36" x 3.90" |
| 292
A/D version |
1.38"
x 4.36" x 6.90" |
| Card-cage
Plug-in Card |
5.24"
x 1.00" x 9.00" |
| Power
Level |
12
VDC @ 0.8 A |
| Power
Connector |
2.5mm
Jack |
| Operating
Temperature |
0
to +50°C (extended range is also available) |
| Humidity |
0
to 95% RH,
non-condensing |
| Status
Indicators |
Power |
| |
|
|
|
| Application |
 |
|
|
|
